Reconn's World
AllDorm Inc.
Home | Robo | Electro | Webring | MessageBoard | Store | Advertise with Us

Make A Collect
Call 4 LESS! Dial
1-877-CALL-4-LESS

Have Feedback?
Click Here!


Suggest
reconnsworld.com
to a friend!

+ Robo:

- Electro:
EE Projects
Schematics Depot
power
audio
ir/ultrasonic
transmitters
telephone
led's
misc. circuits

+ Webring:

+ MessageBoard:

+ Store:

+ Advertise /w Us:

+ Link to us:


Questions? Feedback? Email me at reconn
@reconnsworld.com



Want to know when
reconnsworld.com
is updated?

Join the
reconnsworld.com
mailing list!

Subscribe
Unsubscribe

Click here for the reconnsworld.com privacy statement
Electronics >> Schematics Depot >> Audio >> tone generator

tone generator:


parts:
U1, U1 NE555 timer IC
R1 1 megohm potentiometer
R2 1 1k resistor
C1 0.001uf ceramic capacitor
C2 0.1uF ceramic capacitor
SPKR1 4 or 8 ohm miniature speaker

all resistors are 5 or 10 percent tolerance, 1/4-watt
all capacitors are 10 percent tolerance,
rated 35 volts or higher
this tone generator can be used to control your robot. you will need to use the tone decoder for this. to widen the range, higher or lower - substitute a higher, or lower valued capacitor for c1. for frequencies about 5khz and 15khz, use a piezoelectric element as the speaker. Use a miniature speaker for frequencies under 5khz, and use an ultrasonic transducer for frequencies over 30khz.
Return to: Schematics Depot, or Audio Circuits
curve

Schematics Depot is a trademarked name held by me as of 1997. No use of that name is
authorized unless in reference to this site. (This means you can't create your own 'Schematics Depot')